|
Sponsored Links
Demodulation is the act of removing the modulation from an analog signal to get the original baseband signal back. Demodulating is necessary because the receiver system receives a modulated signal with specific characteristics, which must be returned to base-band. There are several ways of demodulation depending on what parameters of the base-band signal are transmitted in the carrier signal, such as amplitude, frequency or phase. For example, for a signal modulated with a lineal modulation, like AM (Amplitude Modulated), we can use a synchronous detector. On the other hand, for a signal modulated with an angular modulation, we must use an FM (Frequency Modulated) demodulator or a PM (Phase Modulated) demodulator. Different kinds of circuits perform these functions. A demodulator is an electronic circuit used to recover the information content from the carrier wave of a signal.[1] The term is traditionally used in connection with radio receivers, but many other systems use many kinds of demodulators. Another common one is in a modem, which is a contraction of the terms modulator/demodulator. Many techniques -- such as carrier recovery, clock recovery, bit slip, frame synchronization, rake receiver, pulse compression, Received Signal Strength Indication, error detection and correction, etc. -- are only performed by demodulators, although any specific demodulator may perform only some or none of these techniques.
|
Demodulation Subcategories
Demodulation Articles
|
|